Volpi Tecno Energia PAGURO 2000, Руководство пользователя

Страница: 33 / 40

OWNERS MANUAL
PAGURO 2000
33
11. DC ELECTRICAL SYSTEM
12 VOLT DC CONTROL CIRCUIT
The engine has a 12V DC electrical circuit that is shown on the wiring diagrams. Refer to these diagrams when
troubleshooting or when servicing the DC electrical system.

CAUTION:
to avoid damage to the battery charging circuit,
never shut off the engine battery switch while
the engine is running. Shutoff the engine
battery switch, however, to avoid electrical
shorts when working on the engine’s electrical
circuit.

WARNING:
do not remove the control box cover when the
generator is running. Dangerous high voltage is
present at this location.
BATTERY
The minimum recommended capacity of the battery used in the engine’s 12V DC control circuit is 90 Ah.
Battery Care
Review the manufacturer’s recommendations and then establish a systematic maintenance schedule for your generator’s
starting batteries and house batteries.

Monitor your voltmeter for proper charging during engine operation;

Make certain that battery cable connections are clean and tight to the battery posts (and to your generator);

Keep your batteries clean and free of corrosion.
WARNING:
sulfuric acid in lead batteries can
cause severe burns on skin and damage clothing.
Wear protective gear.
Checking the service battery
Check the voltage of the service battery. This battery should have a voltage between 13 and 14 volts when the engine is
running. If not, there is a problem in the service battery charging circuit by checking the wiring and connections, the solenoid,
isolator, battery switch, and the battery itself.
A 5 amp fuse located in the control box protects the battery charging circuits. No panel lights means a blown fuse.