Balloon Live Sensor
User
Manual
Page 12
Firmware FS.04.17
Date: 2021-05-13
Changing function mode settings
Some function modes provide the ability to modify their settings. The settings can be
changed by pressing the OK/mode/config
button for at least 3s until the display value
starts flashing. The value or setting can then be changed using the Selection up
or the
Selection down
buttons. When the desired setting has been selected it is accepted after
pressing the OK/mode/config
button or after waiting for 30s.
The following table lists the function modes, the available units and the mode settings
available:
Symbol
Function
Unit switching
Settings configuration
(long press
)
Altimeter
ft, m
Adjust current altitude
Variometer
m/s, ft/min*100
--
Barometric
pressure
hPa, inHg
Adjust QNH
Ground speed km/h, m/s, kt, mph
--
GPS location
latitude, longitude
--
Clock
24h, 12h am/pm
Adjust time zone
Memory usage Start and stop track recording
Adjust recording interval
and start/stop mode for
track recording
Audio settings
Volume: 0%, 33%, 66%
100%
--
More information about the settings that can be configured for the respective function modes
is provided below in the detailed function descriptions.
