VOIspeed V-IP400 User Manual
©
VOI
SPEED
L
TD
.
16
5.4.
VOIP
This page contains details required for logging into a SIP server. It is strongly
recommended to define PRONTO server as the main SIP server (a secondary SIP server
can be specified in the Advance
VOIP page). If the V-IP400 telephone doesn’t login
into a SIP server, the user will not be able to use any V-IP400 features (including dialling
and receiving phone calls).
Before proceeding, you need to create a new user (that will be used to connect the IP
phone) in PRONTO server. Furthermore, you will need to enable all UDP traffic on port
5060 on the network firewalls. After this, you can enter all the details corresponding to the
new user you have just created in this window:
Details (only mandatory fields are described and listed below)
SIP registration status; if the registration
is successful it shows
Registered
, or
Unregistered
otherwise.
Pronto server IP address.
SIP server destination UDP port (default
5060).
SIP username (the username of the
Pronto user).
SIP Password (the password of the
Pronto user).
Insert “voispeed” string (required during
SIP authentication).
SIP UDP source port (default 5060).
Registration expiry time.
