VOIspeed V-IP400 User Manual
©
VOI
SPEED
L
TD
.
10
recording press REC button again. The recorded call is stored in the server
PLAY
Opens the phone address-book
M1—M10
Press the M button to display the stored number; wait 5 seconds to go back or press EXIT.
If you need to change the memory key association, press DEL button to delete the old
number and enter the new number in 5 seconds, then press OK to confirm. Each memory
number should be configured in this way.
After setup, the lamps on the phone will display the state of each extension linked to the
memory buttons. When the loudspeaker is activated or the handset is lifted press a memory
button to call the associated extension.
The lamps will show the following states:
logged out or empty memory = off,
free/idle = green,
busy = red,
ringing = fast blinking amber,
divert = slow blinking green,
pause = slow blinking red,
answer wait = red
answering machine = amber
4.1.2.
How to place a call
You can start a call in several ways:
1.
Lift the handset or press the SPEAKER button and then dial the number.
2.
Lift the handset or press the SPEAKER button, press the REDIAL button if you
want to redial the last number called.
3.
Lift the handset or press the SPEAKER button, and press a non null memory key.
4.
Without lifting the handset, choose an entry in the address book (or call list) and
press REDIAL.
Once you have entered the number (points 1, 2) press the “#” key to start the call. The call
will be otherwise initiated after a pre-set timeout (you can set the timeout in the web
interface menu
Advance – Digital Map
).
Example:
If you want to call 1001, lift the handset or press the SPEAKERPHONE button and then
dial 1001#.
4.1.3.
Hold
Press the HOLD key (the display will show PLEASE DIAL). Press HOLD again to retrieve
the call. Note: if you hold the call for more than 10 seconds, you will hear a continuous
tone and the display will show PLEASE HANGUP. However, you can press HOLD again
to retrieve the call..
