Vogtlin SmartTrak 100 Series, Руководство пользователя

Страница: 39 / 114

39
Change Setpoint
12.50 sl/m
Air
Now that you have made your selection, press the enter key. The display from our
example will show:
Change Setpoint
12.50 sl/m
Air
If you are finished or wish to observe the changes you have made on the LCD panel, press
the escape key to return to the Upper Level Mass Flow Screen.
If you prefer to make additional changes, use the left and right arrow keys to move to
other Lower Level Screens.
Caution!
The SmartTrak will not
allow you to enter a
setpoint greater than the
current full scale value
set on the instrument.
Note: If you enter a Setpoint that exceeds the full scale value (displayed in
the “Full Scale” screen in the Upper Level), the SmartTrak will
automatically modify this value to equal the current full scale value. For
example, if the current full scale value of your instrument is 10 ln/min and
you have entered a setpoint of 15 ln/min, the SmartTrak will modify your
setpoint to 10 ln/min when you implement the change. The Setpoint Value
screen will show 10 ln/min, not 15 ln/min.
Change Units Screen
If you are already in the Lower Level Screens, push the right or left arrow until you reach
the Change Units screen. To get to this screen at any time, Press Escape—Press Enter—
type password and Press Enter. Then, press the Right or Left arrow until you reach the
Change Units Screen
.
The display will show:
Change Units
sl/m