manualshive.com logo in svg

Vogtlin SmartTrak 100 Series, Руководство пользователя

Поделиться
Скачать
Vogtlin SmartTrak 100 Series Скачать руководство пользователя страница 15

15 

 

 

 
 
 
 

Installing your Instrument—Mechanical Mounting 

Mounting your Instrument 

The base plate or bottom of the instrument has 4 mounting holes. Two are SAE thread and 
two are metric thread. For location and dimensions, please see Appendix A. 

 

Your SmartTrak instrument is made from premium 316 stainless steel. As a result, it may 
require substantial mounting brackets to properly support its weight. Exercise caution when 
installing to avoid damage or injury. 

 

Mounting the Optional Remote Pilot Module 

If you have the optional Remote Pilot Module control unit, you have several mounting 
options. 

 

1.

 

Wall or Panel mounting

—your Remote Pilot Module may be mounted to a flat 

surface using the supplied plate and 2 special “shoulder” screws. Simply screw the 
shoulder screws into the plate. Then, attach the plate to the wall by driving 2 
screws (not included) through the 2 large central holes. 

MAKE SURE THE UP 

ARROW IMPRINTED ON THE MOUNTING BRACKET POINTS 
UPWARD. 

Your Remote Pilot Module will slip onto the shoulder screws. Push 

against the plate and then down. To remove, push up and pull. Attach the CAT-5 
cable to the socket on the bottom of the Remote Pilot Module. 

 

2.

 

Rack mounting

—to mount your Remote Pilot Module to a standard 19”  

laboratory rack, first purchase a “blank” panel from your industrial supplier. 
Decide where the Remote Pilot Module will be attached, then follow the procedure 
listed above for wall mounting. When you are ready, insert the CAT-5 cable into 
the socket in the Remote Pilot Module. 

 

3.

 

Desktop mounting

—the Remote Pilot Module will sit on a desk in a fashion that 

makes it convenient to view and operate. Insert the CAT-5 cable into the socket in 
the back of the Module. Use the cable as a “kickstand.” Gently bend the cable to 
recline the Remote Pilot Module to an angle suitable for easy  viewing. 
Alternately, you can lay the Remote Pilot Module on its back and insert the CAT-5 
cable into the socket in the bottom. 

 

 

Installing your Instrument—Electrical Connections 

All electrical connections for your SmartTrak instrument are made on the left (inlet) side 
panel. See Figure 2-2: SmartTrak Connections below for the location of all connections. 

Note that the CAT-5 connector is not an ethernet connector. 

Содержание SmartTrak 100 Series



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды