Vogel Pumpen SEKAMATIK 200 E UF Скачать руководство пользователя страница 13

 

13

Pumps running under normal operation conditions should 
be inspected at least once a year. If the pumped liquid is 
very muddy or sandy or if the pump is operating continu-
ously, the pump should be inspected every 1.000 operat-
ing hours. 
For long and trouble-free operation of the pump, following 
points should be checked regularly: 
 
- Nominal current (A): Check with amp-meter. 

- Pump parts and impeller: Check for possible wear.  
Replace defective parts. 

- Ball bearings: Check the shaft for noisy or heavy 
operation (turn the shaft by hand). Replace defective ball 
bearings. A general overhaul of the pump is usally 
required in case of defective ball bearings or poor motor 
function. This work must be carried out by an authorized  
service workshop. 

- Cable entry: Make sure that the cable entry is watertight 
and that the cables are not bent sharply and/or pinched. 
 

Additionally at pump types with oil chamber: 

 
- Oil level and oil condition in oil chamber:  
Put the pump in horizontal position, so that the screw of 
the oil chamber is above (at larger pumps: one of both 
screws). Remove the screw and infer a small quantity of 
oil. The oil becomes greyish white like milk if it contains 
water. This may be the result of defective shaft seal.  
In this case leave the condition of the shaft seals by a 
VOGEL Service to examine. 
 
The oil should be replaced after 3000 operating hours.  
Oil type: Shell Tellus C22. Used oil is to be disposed 
accordingly. 
 
For long and trouble-free operation of the unit we 
recommend the following measures: 

 

Clean the pump station with clear water and 
scour the pump station by running pumps every 
6 months. 

 

Check the operatability and the mobility of the 
niveau sensors every 6 months. 

 

Make an arrangement with you VOGEL agent for 
an annual maintenance. 

 
 

Servicing Contract  

For a regular expert execution of all necessary 
maintenance and inspection we recommend the 
conclusion of a servicing contract by our VOGEL Service.  

 
 
 
 
 
 

Pump type 

 

 

 

 

 

 

No.  

 

 

 

 

 

 

Correspond to our warranty conditions 
we achieve 
 
 

 

12 months of warranty 

 
 
 
 
 
 
 
 
 

 
 
 
 

10. Warranty receipt

 

Содержание SEKAMATIK 200 E UF


















Отзывы: