Vodavi Starplus STSe, Быстрый старт

Страница: 47 / 72

STSe Quick Start Guide September 2005
- 43 -
VO D AVI
WIN DBA
Download WIN DBA Software from Vodavi Website
1. Go to the Vodavi web page, www.vodavi.com .
2. On the left, click on “Dealer Sign-In”.
3. Enter Login Name and Password, then press the Login button. “If you are not a registered member, sign up
by clicking on click here in the “Need to Register” area. (Within approximately 24 hours you will be emailed
with your Login Name and Password).
4. Click on Starplus product line. And then click “Next”.
5. Click on Software Downloads.
6. Go to the WIN DBA block.
7. At WIN DBA, click on WIN DBA for the STSe system. ( NOTE : software version: 0.08 is a “Field Trail”
version. Report any problems to Vodavi Tech Support.
8. At “File Download” screen click, Save.
9. At “Save As” screen, save file to Save in_________ and File Name ____________ and click on “Save”.
(e
xample : Save in: Desktop; File Name: STSe DBA 008)
10. When Download is complete. Click the “Open” button.
11. Look for ICON that resembles a 3.5” floppy disk and reads “SETUP”. Double-click the setup ICON.
12. Follow the Wizard and click Next; Next; Next; Next. When the Wizard is finished, a folder called
WINDBA_STSe is established with an ICON (WinDbaV72 Shortcut).
To Start a New File Using WIN DBA Software:
1. Click on the WinDba72 Icon.
2. Click on “File”.
3. Click on “New.”
4. Select a default configuration.
5. Enter Password, “SECRET”.
6. At Select Directory window, in the Directory Name block: place cursor at the end of existing Path name and
enter “
\ ”, followed by file name you want to establish ( example : \Mike), then click OK .
7. When system is finished building program, click “Edit”. (Notice that Program codes are listed from top to
bottom, and Icons are from left to right).
8. Note the following folders:
a. File (Open, New, Close, Delete, Copy, Report, and Exit)
b. Edit (14 programming sections up and down and their Icons appear left to right)
c. Tools (Connect, Disconnect, Upload to KSU, Download from KSU, Download from File
Modem/RS-232, Monitor).
d. Help (Contents, How To Use Help, About)
9. Review the Help folder for using this program. Also, make note of software version number.
10. To “Exit”. Click on File, Close, then Exit. Always save program.
To Open an Existing File Using WIN DBA Software:
1. Double click, WinDbaV70 shortcut Icon.
2. Click “File”, then “Open”.
3. Double click “Directories: (file). (example: Mike)
4. Click OK .
5. Enter Password, “secret”. Click OK .
6. Click “No” at the “Do you wish to backup this database” prompt.
7. Click “Edit”. Note Icons and program section names.
8. To exit, click “File” and “Exit”, then “X” to close.