Vodavi Starplus STSe, Быстрый старт

Страница: 25 / 72

STSe Quick Start Guide September 2005
- 21 -
VO D AVI
COMMON PROGRAMMING ITEMS (cont’d)
8. Set-up Modem Dialing to Voicemail (498)
* * 3226
FLASH 67
Press Flex Button 6, then press 1 and HOLD.
Lower RS232 serial port is now enabled.
Use the null modem cable that comes with the Modem Card (Null Modem Cable) to connect from Serial
Port 2 (lower RS232) on KSU to the serial port on the Flash voicemail.
Set up Hyper-Terminal to dial number into phone system.
Call must be answered and transferred to 498.
When 498 answers, press
ESC. At password screen, enter password (0000) and program as required.
9. Card Slot Programming
To add a new card to a system, the card slot must be programmed for the type of card.
(
For programming to take effect, the system must be reset after card slot programming is completed .)
NOTE
: Power must be turned OFF prior to installing cards.
* * 3226
FLASH 24
Press Flex Button starting with Flex Button 4 (card slot 3).
[00]= None
[08]= PRIB [15] = LCI4 (CO Line Card)
[02]= DTIB (Digital Card) [09]= T1IB [16] = SL04C (with caller ID)
[04]= SL02 (built-in 2 port card) [13] = SL04 (Analog Card] [17] = VMIB (Flash or HDD VM Card)
If the T1IB option is selected, enter a valid number (1-5) to specify the desired cluster (partial) quantity.
[1]= cluster 4
[4] = cluster 16
[2]= cluster 8 [5] = cluster 20
[3]= cluster 12 [No Entry] = All CO lines
10. Fax Detect
Allows for CO Lines to be used for incoming Fax calls. For example, when Fax Detect is enabled on all CO
lines, then the System answers the call and looks for the Fax signal. If the Fax Signal is present the fax
call is routed to the analog station connected to the Fax machine. If the Fax signal is not present, then the
call is routed as identified in Flash 40 “Ringing Assignments”.
To enable Fax Detect:
a. * 3226
b. FLASH 40, and enter CO Line range to program
c. Flexible Button 20, Page B
d. Flexible Button 18, Fax Detect
e. Dial 1 to Enable
f. FLASH
09
g. Flexible Button 13, Fax Route
h. Enter the Analog port assigned to the Fax machine.
i. FLASH
01
j. Flexible Button 5, Fax Timeout
k. Enter number of seconds for a CO Call to look for a fax signal, before it is considered a non-fax call.
l. FLASH
5
m. Flexible Button 19, Fax Detect Long Time.
n. Enter 1 to Enable (Enabled = 7 seconds; Disable = 3.5 seconds)