Vodavi Starplus STSe, Быстрый старт

Страница: 43 / 72

STSe Quick Start Guide September 2005
- 39 -
VO D AVI
UPGRADING SOFTWARE
STSe Upload/Download Flash ROM
1. Ensure new software is loaded on your computer. (.brn file is available)
Software can be found on the web page at
www.vodavi.com under Technical Support Downloads.
Download software comes with a notice on how to unzip file, etc. (software might be on a CD)
The instructions below are for after the software is ready to load.
2. Connect computer to KSU serial port.
3. Access Hyper-terminal.
4. Press enter.
5. At prompt for Password, type: config .
6. Press enter.
7. Type “U”.
8. Press enter.
9. Enter password: 3226vodavi
10. At the maint prompt enter “U”.
11. Display shows :
Software upload initiated
Flash bank will now be erased
Please wait
When completed display shows :
Flash bank erased completed
To start XMODEM upload, enter Yes (Y) or No (N)
12. Type “Y” for yes.
13. Immediately select “Transfer” from dropdown menu at top of screen.
14. Select: Send File.
15. Select the file by selecting “Browse” to find the program (.brn)
16. Then click “OPEN”.
17. Ensure that the protocol is “XMODEM”.
18. Click “SEND”.
Upload will begin and take 15 to 20 minutes. The progress bar will indicate that the file is being uploaded.
19. When completed the display will show:
XMODEM transfer complete
20. To run new software place the PMU switch in the opposite position. (Bank 1 UP or Bank 2 Down). And
reset system.
NOTE
: To revert to the old software place the switch back in the old position and reset system.
21. At phone dial 605 to verify software version is correct