Vodavi MiniVoice, Руководство пользователя

Страница: 17 / 82

Voice Mail Integration Programming 1-13
6. Retrieve Table Programming:
a. Press Button #2 (Table 1).
b. Enter a [0] + [TRANS] + [#] on the keypad, where:
†
0 indicates a prefix digit.
†
The [TRANS] button represents a pause based on the system
pause timer.
†
# represents an owner on the VM system.
c. Press the [HOLD] button to update.
d. Press Button #2 (Table 1).
e. Enter [1].
f.
Press the [HOLD] button to update (when you update, this field is blank).
7. Press Button #9 (disconnect table).
a. Enter [ 6666 ], where 6666 is the disconnect code used by the
MiniVoice .
b. Press the [HOLD] button to update.
8. Assign VM flexible buttons (440) on the stations. At each station perform
the following:
a. Press the [SPEED] button twice.
b. Press the desired flexible button to be programmed.
c.
Dial [440] on the keypad.
d. Press the ON/OFF button.
Note that you can adjust the volume level on each SLT port by using the
volume up or down code. This provides additional control for both internal
and external calls into the voice mail system. For example, while using a
single line telephone and on a CO Line call, to increase volume: perform a
hook flash, then dial [638] + [8] followed by another hook flash. A
confirmation tone sounds.