Voce B2C Скачать руководство пользователя

Страница: 26 / 38

tio

n 7

– O

rat

ors

gram

Section 7 – Operators Program

To access the Operators Program, enter the programming

mode as described in

Section 6

. Once in the Operators

Program the LCD will display the Main Menu.

N.B.

Coins In/Out will only be displayed on machines fitted

with an MDB coin mech.
Using the

(up) or

(down) keys,

↵

(Edit) key and

(Exit) key on the drink selection keypad

the operator can navigate quickly and easily through the operators program menus.

7.1 Data Recall Menu

This menu allows the operator to view Non- Resettable

and Resettable Sales Data, view data relating to Events and

Identification Numbers of installed components and view

SureVend™ information. The Re-settable Sales Data and

SureVend™ data menus contain an extra sub-menu which

allows the operator to delete the current data.

7.1.1 Non Resettable Sales Data

This menu allows the operator to view and record monetary and sales values. This data cannot

be reset and will remain intact for the service life of the controller board (unless the back-up

battery is removed).

1. From the Data Recall screen highlight Non

Resettable Sales Data and press the

↵

(Edit)

key. The LCD will display the screen as shown

opposite. From this menu the operator can

view data for the Overall Totals (highlighted),

By Product, along with data relating to Cash,

Cashless and Token Vends.

2. To view the Overall Totals screen, press the

↵

(Edit) key on the drink selection keypad.

This menu displays the following data:

All Data-£

Displays the total machine sales in £

All Data-#

Displays the total number of machine vends.

Sales-£

Displays the total machine sales in £ except free and test

vends

Sales-#

Displays the total number of machine vends. Including

normal, discount and surcharge vend totals but not free

and test vends.

Discount-£

Displays the total monetary value of all discounts in £

Discount-#

Displays the total number of discounted vends

Test Vend-£

Displays the total monetary value of all test vends in £

Test Vend-#

Displays the total number of test vends

Surcharge-£

Displays the total monetary value of all surcharges in £

Surcharge-#

Displays the total number of surcharge vends

Содержание B2C







































Результаты поиска

Содержание B2C

Отзывы:

Похожие инструкции для B2C

Бренды по названию

Популярные бренды

Voce B2C, Руководство оператора

Результаты поиска

Содержание B2C

Отзывы:

Похожие инструкции для B2C

Бренды по названию

Популярные бренды