S
ec
tio
n 6
– Pr
og
ra
mmi
ng
M
od
e
23
6. To update parameters, key in the actual digits of the number required using the
selection keys 0-9 and press the
↵
(Edit) key to save the new value. Pressing the
X
(Exit) key will move back to the previous screen.
Certain programming functions require that the operator chooses either one or
multiple parameters within a sub program. These can take the form of either check
boxes or radio buttons.
7.
Check Boxes:
The example opposite shows the
Days of Week screen which allows the operator
to choose multiple days of the week on which a
specific function will take place.
8. Using the
²
(up) or
¼
(down) keys, scroll through until the required day is
highlighted as shown.
Pressing the
↵
(Edit) key will select the day, indicated by an X appearing in its adjacent
box.
Continue until all required days have been selected. Pressing the
X
(Exit) key will
move back to the previous screen and save the new settings.
N.B.
Pressing the
START/?
key on the drink selection keypad will check all boxes if
empty or clear all boxes if checked.
9.
Radio Buttons:
The example opposite shows the
State screen which requires the operator to
select one of the options shown. Use the
²
(up)
or
¼
(down) keys to set the required option
followed by the
↵
(Edit) key to store/save it
(indicated by the filled radio button).
All operator programming for the VOCE range follows the procedures as described above.
Specific program actions are described fully in the following section.
