UD101L User Guide Document: UD101L-2
----------------------------------------------------------------------------------------------------------------------------- ---------------
38
signal, the adjustment value will be converted to 600 pixels automatically to maintain the same
image position.
10. Miscellaneous settings
10.1. EDID Setting
Selective EDID setting for input source resolution is added into GeoBox. The settings will be applied
to individual processing module on select input port. Each processing module needs to set EDID
separately. For daisy chain connection, user only needs to set the EDID in the first input port
connected with sigal source. The purposes for EDID setting are as follows:
➢
GeoBox can support big range of input signal timing
—from XGA up to 4k/2k @60Hz. In order to
get the best video performance, user needs to select the best input signal resolution.
➢
Different display modes may show different final image aspect ratio. User can ultilize different
EDID setting to change signal source timing and get different output aspect ratio.
➢
Use can select different EDID directly from OSD list or use [Customize] function to create Non-
VESA standard timing.
-
Activate EDID setting menu:
[Options]
→
[Setting]
→
[EDID]
-
Use IR remote controller to select desired
EDID.
-
After select EDID, signal source will auto-
change the output timing setting.
-
Press [INFO] key to check if the input and
output timing are set correctly.
-
User can also set EDID manually. The
range for customized EDID will be from
1024x768 to 3840x2400.
-
Horizontal resolution is in a step of 8
pixels and vertical resolution is in 1-pixel.
-
After creating the EDID, PC or laptop may
not output required timings due to
hardware limitation or driver issue. User
may need to do custom setting inside PC
to get desired output resolution.
