UD101L User Guide Document: UD101L-2
----------------------------------------------------------------------------------------------------------------------------- ---------------
10
2.4.3. Ethernet
➢
User needs to connect UD101L to WiFi Router or switch/hub through RJ45 to LAN port.
Then user can control the system through Ethernet.
➢
Crossover UTP cable can be used for direct connection between PC and GeoBox. User
needs to set PC TCP/IPv4 with the same domain segment as GeoBox (for instance, to set
IP address at 192.168.0.105) and subnet mask at 255.255.255.0).
➢
Open web browser (Google Chrome or Internet Explorer) and input UD101L IP address
(default is 192.168.0.100), user can see GeoBox WebGui and menu with virtual keys
similar to OSD for further system operation. There is no additional software is required.
➢
If user can’t connect the network, please power off/on UD101L again to let PC detect
UD101L network system.
➢
User can set DHCP for the connection. If necessary, please [Renew] DHCP to get IP
address before network connection.
➢
Gwarp3 PC Tool is another web tool that has full function for system setting and operation.
It can also update Firmware or MCU code. Gwarp3 can be downloaded from VNS website.
➢
Each UD101L can set different IP address for independent operation and control.
➢
Please use < > OSD keys to select OSD menu items and use
˄ ˅ OSD keys to change IP
address.
➢
If UD101L is connected with WiFi Router (through LAN port), user can control UD101L
through WiFi via PC, iPad or mobile phone.
➢
Default TCP server port is 1266.
