UD101L User Guide Document: UD101L-2
----------------------------------------------------------------------------------------------------------------------------- ---------------
27
4.3.5. Corner Wall geometry adjustment
Important note: When apply Corner Wall function, all the other geomtry alignment function will be
disabled. User can only execute geometry alignment through 8 points of Corner Wall adjustment. 4
corner control points can execute image 4 corner alignment same as [2x2] geometry alingment
function.
Corner Wall alignment allows user to adjust the image at 90 degree corner wall. It can execute
horizontal and vertical corner alignment. User can only select either horizontal or vertical alignment
at one time. The image position can be adjusted as below:
➢
4 corner image positions
➢
The transition position of the image in horizontal or vertical direction
➢
The maximum Corner adjusting range is +_ 900 pixels and the curvature location adjusting
range is +_900 pixels.
➢
User can’t use ultra-short throw ratio projector for corner wall application. Otherwise, the
image distortion will be too big to be adjusted and may also create focus issue.
Grid line gap adjustment
