11
21.1
Install the rubber servo grommets & brass ferrules supplied
with your radio equipment. The three servos that control the eleva-
tor, rudder and throttle are to be installed in the servo tray mounted
in the fuselage. Remove the servo tray from the fuselage, mounting
the servos to the servo tray as shown.
21A- Universal servo tray
20C- Elevator control horn location
20D- Rudder control horn location
Elevator
control
horn
location
Rudder
control
horn
location
21B- Note the orientation and positions of the three
servos in the servo tray
21C- Throttle, rudder and elevator servos connect-
ed to their push rods as referenced left to right.
22.1 Consult illustrations 21C & 22A-C show-
ing how the throttle, rudder and elevator ser-
vos are positioned and connected to the
pushrods.
STAGE 21
- INSTALLING THE SERVOS
STAGE 22
- CONNECTING THE PUSHRODS
TO THE THROTTLE, RUDDER AND ELEVATOR SERVOS
22A- Throttle (left), elevator (upper) & rudder (lower)
servos connected to their respective push rods.
Throttle
servo
Elevator
servo
Rudder
servo
NOSE
TAIL
NOSE
TAIL
