VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
78
Completing the Installation
☐
Reinstall the driver side headlight.
☐
Reinstall the grille.
☐
Reinstall the radiator cross member cover.
☐
Reinstall the secondary coolant reservoir.
☐
Install inner fender (if previously removed).
Modifying the Degas Hose Network
There are (×2) Tee fittings in the degas hose network that will be
reused. One of the Tee’s has a built-in orifice which dictates its
orientation; this Tee is labeled (Figure 117).
Figure 117 — Degas Tee orientation
Figure 118 — Modifying the degas hose network
☐
Remove the OEM hose clamps from the (×2) Tee’s and discard.
☐
Disconnect the short hose running between the (×2) Tee’s.
☐
Rotate the passenger side (unlabeled) Tee 90° counter clockwise and reinstall
it onto the 2 hoses. Secure the hoses with the supplied hose clamps (Figure 118,
Figure 119).
Tee with
orifice
