VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
33
Due to variances with trucks it may be necessary to remove more
material from the fan shroud. After the truck is assembled inspect
the area to ensure there is enough clearance.
Figure 43 — Fan shroud modification
Figure 44 — Fan shroud modification
☐
Remove the power steering mounting boss and cut out the shaded area
(Figure 43, Figure 44).
☐
Use the VMAC power steering bracket as a template to locate and mark the
location of the top hole (Figure 44).
☐
Drill the marked location using a 1/4 in drill bit (Figure 44).
Follow the edge of
the molded bracket
Drill shroud
See Figure 44
for dimensions
Bolt VMAC
bracket
1 3/8 in
1 3/4 in
1 1/4 in
