VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
26
☐
Mark a cut line from the engine side battery tray mount, down to the base of
the battery tray (Figure 30, Figure 31).
☐
Continue the cut line along the base of the of the battery tray (Figure 30,
Figure 31).
☐
Mark a vertical cut line along the forward side of the engine face of the battery
tray (Figure 30, Figure 31).
☐
Cut the tray along the marked lines. Deburr any rough edges.
☐
Re-assemble the snorkel and lower duct assembly onto the battery tray.
☐
Reinstall the modified battery tray assembly into the vehicle.
Figure 30 — Modifying the battery tray
Figure 31 — Modifying the battery tray
