Vmac V910020 Скачать руководство пользователя страница 44

Страница: 44 / 100

VMAC - Vehicle Mounted Air Compressors

VMAC Technical Support: 888-241-2289

VMAC Knowledge Base: www.kb.vmacair.com

Installing the Air Oil Separator Tank

Dependent upon other installed equipment, it may be necessary to

move the AOST from its intended location. The hoses used in VMAC

compressor systems have a specific inner liner that is compatible

with VMAC compressor oil. Use of hoses other than those supplied

or recommended by VMAC may cause compressor damage and may

void the warranty.
Please contact VMAC for replacement hoses and further

information.

When installing the AOST mounts, ensure that the harness running

along the top of the frame is not pinched.

Installing the AOST

☐

The AOST will mount to the passenger side frame rail behind the suspension

radius arm mount (Figure 58).

Figure 58 — AOST installed

Front of vehicle

The AOST must be level for proper air/oil separation and to ensure

that the oil level will display accurately in the sight glass.

Содержание V910020





































































































Результаты поиска

Содержание V910020

Отзывы:

Похожие инструкции для V910020

Бренды по названию

Популярные бренды

Vmac V910020, Руководство по установке

Результаты поиска

Содержание V910020

Отзывы:

Похожие инструкции для V910020

Бренды по названию

Популярные бренды