VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
25
Figure 26 — Routing the hoses
☐
Route the hose down toward the firewall; pass the hose between the inner
fender and the body mount and connect it to the Tee on the AOST (Figure 26).
Oil fill
hose
AOST to
compressor
hose
☐
Route the hose down toward the firewall; pass the hose between the inner
fender and the body mount and connect it to the Tee on the AOST.
☐
Connect the 90° fitting from the longer 1/2 in hose (cooler to compressor) to
the passenger side fitting on the oil cooler.
☐
Connect the 90° fitting from the shorter 1/2 hose (AOST to cooler) to the driver
side fitting on the oil cooler.
☐
Route the (×2) 1/2 in oil hoses along the top of the frame, to the rear of the
inner fender liner.
☐
Route the (×2) 1/2 in hoses out of the engine bay and down, past the body
mount.
☐
Connect the 90° fitting on the 3/4 in (discharge) hose to the front of the Tee
fitting on the AOST.
☐
Connect the shorter 1/2 in hose (AOST to cooler) to the matching fitting on the
front of the AOST.
Discharge
hose
