VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
34
Power Inverter
☐
Remove the dashboard panel and steel plate located below the steering wheel.
Figure 37 — Inverter mounting tab
Mounting tab
Module
bracket
Towing
Module
Vehicles equipped with a tow control module*:
☐
*Detach the module from the bracket and move it aside.
☐
*Remove and discard the tow control module bracket from the mounting tab.
☐
Using the supplied cable ties, secure the inverter to the mounting bracket in the
orientation shown (Figure 38).
☐
Locate the mounting tab under the dashboard above the park brake. Vehicles
equipped with tow control options may have a tow module attached to the tab
Due to slight variances in manufacturing and/or optionally installed
equipment, it may be necessary to mount the inverter in an
alternate location.
If an alternate location is required, ensure the selected location will
provide adequate clearance for ventilation, and that the supplied
harnesses can be routed to the compressor without contacting
hot, sharp, or moving parts (including the park brake mechanism,
steering column, and pedals).
Figure 38 — Mount inverter onto bracket
