VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
10
☐
Cut the radiator hose in the two marked locations, ensuring the cuts are square
to the hose section.
☐
Install the modified radiator side of the lower radiator hose onto the radiator.
☐
Install the modified engine side of the lower radiator hose onto the engine.
☐
Remove the anti-abrasion sleeve from the center section of the lower radiator
hose and slide it over the radiator side coolant tube; securing it in place with
cable ties (Figure 4).
Figure 4 — Radiator side anti-abrasion sleeve
(Coolant assembly removed from vehicle for clarity)
Mesh abrasion
sleeve
☐
Cut a straight 6 in section of the discarded lower radiator hose and slit it
lengthwise. This will be used as an anti-abrasion sleeve on the driver side
coolant tube.
☐
Wrap the 6 in section around the straight section of the driver side coolant tube
and secure with cable ties (Figure 5).
Figure 5 — Engine side anti-abrasion sleeve
6 in coolant hose
abrasion sleeve
