VKI Technologies Eccellenza touch Скачать руководство пользователя страница 12

Страница: 12 / 84

ecti

on 2

- S

ett

ing U

p the

ipment

Operation Manual

VKI Publication #100308-003

Installation Precautions

This equipment is designed for indoor use only and must never be installed

outdoors.

Installation of this equipment must comply with all local, state/provincial and

federal codes and regulations. It is the sole responsibility of the installer to

research and to comply with these codes and regulations.

This equipment must be installed on a dedicated 15 amp outlet. Do not

install other equipment on the same outlet/circuit.

Ensure that the equipment is level and stable. This is done by adjusting the

levelers (legs) at the bottom of the machine. Also, do not block any of the

equipment's ventilation ports.

Avoid using extension cords and power bars when connecting this equipment

to a power source. If the use of an extension cord or power bar cannot be

avoided and must be used (this is not recommended by VKI Technologies),

they must be of the heavy duty type with a minimum rating of 15 Amps.

Leave room at the rear of the equipment for the plumbing fitting and water

hose, as well as for adequate ventilation.
Leave ample room above the equipment to open and fill the product

hoppers.

Water Connection

Installation of this equipment must comply with all local, state/provincial

and federal codes and regulations. It is the sole responsibility of the installer

to research and to comply with these codes and regulations.

Accessibility to shut-off valve(s) must be provided and explained to customer

in the event water supply to brewing equipment must be shut off.

For multi-unit locations whereby the main water conduit is supplying water to

more than one unit (including water coolers), a separate in-line shut off valve

must be installed onto each individual equipment unit.

Содержание Eccellenza touch





















































































Результаты поиска

Содержание Eccellenza touch

Отзывы:

Похожие инструкции для Eccellenza touch

Бренды по названию

Популярные бренды

VKI Technologies Eccellenza touch, Руководство по эксплуатации

Результаты поиска

Содержание Eccellenza touch

Отзывы:

Похожие инструкции для Eccellenza touch

Бренды по названию

Популярные бренды