VKI Technologies Eccellenza touch Скачать руководство пользователя страница 10

Страница: 10 / 84

ecti

on 2

- S

ett

ing U

p the

ipment

Operation Manual

VKI Publication #100308-003

Lift the box over the machine (D) and remove the four corner supports (E).

With the help of a colleague, lift the coffee maker off the base of the packaging (F) and

place it onto a workbench or cabinet.

Do not attempt to lift the machine by yourself.

DO NOT lift the coffee maker by placing your hand underneath the front

door. It is not designed to support the weight of the machine, and serious

personal injury and/or damage to the unit may occur.

Remove the blue shipping tape



and the protective film



from the outside of the

machine.

Remove the keys from the cup stand



and then install the cup stand assembly onto

the front door.

Keep all packaging material in case the equipment must be transported or

shipped. When transporting the unit for installation, leave it on the base of

the packaging to reduce the risk of damage to the levelers.

Drain the water tank and empty all of the ingredient dispensers prior to

transporting or storing the equipment!

Содержание Eccellenza touch





















































































Результаты поиска

Содержание Eccellenza touch

Отзывы:

Похожие инструкции для Eccellenza touch

Бренды по названию

Популярные бренды

VKI Technologies Eccellenza touch, Руководство по эксплуатации

Результаты поиска

Содержание Eccellenza touch

Отзывы:

Похожие инструкции для Eccellenza touch

Бренды по названию

Популярные бренды