Vivitek DK8500Z, Руководство пользователя

Страница: 13 / 25

DK8500Z DLP Projector Remote Communication Manual
12
RM85001117EN00
OSD Function Operation
command Settings/Return Values Note
Light Power laser.mode ?
= 0 = Eco Mode
1 = Normal Mode
2 =custom Power Mode  Not applicable when the project is
in standby mode

Customer
Power Level laser.power ?
=
20-100
Adjust range: 20%-100%  Not applicable when the project is in
standby mode and Light Power is
not set to Custom Power Level
(laser.mode=2).
Constant Brightness
Enable / Disable Laser.cbc.enable ?
=
0 = Off
1 = On  Not applicable when the project is in
standby mode
Constant Brightness
Check the status of the
function. laser.cbc.state ?
=
0 = Normal
1 = Laser power is driven
to the limit, Constant
Brightness can’t work. 
Background no.signal ?
=
1 = Black
2 = Blue
 Not applicable when the project is in
standby mode
Startup Logo startup.logo ?
= 0 = Off
1 = On  Not applicable when the project is at
standby mode
Remote Sensor ir.enable =
? 0 = Off (Disable)
1 = On (Enable)  Not applicable when the project is in
standby mode
Trigger trig.1 ?
= 0 = Off
1 = Screen
2 = 5:4
3 = 4:3
4 = 16:10
5 = 16:9
6 = 1.88
7 = 2.35
8 = LetterBox
9 = Source
10 = Native  Not applicable when the projector is
at standby mode.
Infrared Remote/
Remote Sensor Ir.enable =
?
0 = Off (Disable)
1 = On (Enable)  Not applicable when the project is at
standby mode
Infrared Remote/ ID
Control Enable Id.control.enable =
?
0 = Off (Disable)
1 = On (Enable)  Not applicable when the project is at
standby mode
Infrared Remote/
Control ID Number Control.id =
?
1-99

Not applicable when the project is at
standby mode and ID Control is
disabled(off)
OSD Settings/ Menu
Position osd.menupos =
?
0 = Top Left
1 = Top Right
2 = Bottom Left
3 = Bottom Right
4 = Center  Not applicable when the project is at
standby mode
OSD Settings/ Menu
Transparency osd.trans =
?
0 = 0%
1 = 25%
2 = 50%
3 = 75%  Not applicable when the project is at
standby mode
OSD Settings/ Time
Out osd.timer =
?
0 = Always On
1 = 10 Seconds
2 = 30 Seconds
3 = 60 Seconds  Not applicable when the project is at
standby mode
OSD Settings/
Message Box osd.msgbox =
?
0 = Off
1 = On  Not applicable when the project is at
standby mode