Vivitek DK8500Z, Руководство пользователя

Страница: 8 / 25

DK8500Z DLP Projector Remote Communication Manual
7
RM85001117EN00
OSD Function
Operation
command
Settings/Return Values Note
HSG/Cyan/Hue hsg.c. hue ?
=
+
-
0-200  Available when the input source is
locked.
HSG/Magenta/Hue hsg.m. hue ?
=
+
-
0-200  Available when the input source is
locked.
HSG/Yellow/Hue Hsg.y. hue ?
=
+
-
0-200  Available when the input source is
locked.
HSG/White/Red Gain hsg.wr.gain ?
=
+
-
0-200  Available when the input source is
locked.
HSG/White/Green Gain hsg.wg.gain ?
=
+
- 0-200  Available when the input source is
locked.
HSG/White/Blue Gain Hsg.wb.gain ?
=
+
- 0-200  Available when the input source is
locked.
HSG Reset hsg.reset (execute) 
Available when the input source is
locked.
Dynamic Black dblack ?
= 0 = Off
1 = On  Not applicable when the projector is
at below condition:
- Standby mode.
- Edge Blend is On
- 3D mode
- Dynamic Black is off
Freeze freeze ?
= 0 = Off
1 = On  Not applicable when the projector is
at standby mode
Alignment
OSD Function Operation
command Settings/Return Value Note
Lens control
Zoom zoom.in (execute)  Not applicable when the projector is
at standby mode
Lens control
Zoom zoom.in.2 (execute)

Not applicable when the projector is
at standby mode.
Lens control
Zoom In zoom.in.3 (execute)  Not applicable when the projector is
at standby mode.
Lens control
Zoom Out zoom.out (execute)  Not applicable when the projector is
at standby mode.
Lens control
Zoom Out zoom.out.2 (execute)  Not applicable when the projector is
at standby mode.
Lens control
Zoom Out zoom.out.3 (execute)  Not applicable when the projector is
at standby mode.
Lens control
Focus near focus.near (execute)  Not applicable when the projector is
at standby mode