Vivitek DK8500Z, Руководство пользователя

Страница: 18 / 25

DK8500Z DLP Projector Remote Communication Manual
17
RM85001117EN00
Control the projector through a network
The projector can be controlled by built-in webpage or sending RS-232 command via TCP/IP communication protocol,
you can select your preferred control per the application.
Control the projector through a web browser
Open the web browser of your control PC; type the IP address you set in the projector. The control page will be shown
as the below, the web control page is composed of seven tabs and three hot keys for projector control and status.
Tab:
Projector Status : Display current projector information and status
Projector Control : This page provides the interface to control power, input and projection lens.
Crestron RoomView : Display Crestron web control page.
Network Setup
: Configure the network settings.
Alert Mail Setup : Settings for projector abnormality email reminders. In case of any abnormality the project
sends emails to preset user
Error Log : Display error log of the projector
OSD Function : This page displays the options on OSD menu, the structure and options are same as most
of the items on OSD menu of the projector.
Hot Key:
Blank : Blank the screen to stop the projection temporarily
Freeze : Freeze the projected image
OSD : Enable or disable OSD menu of the projector. Press this button to hide OSD menu, press
again to display menu.