31
4.3.3 Attach Voice
The third menu item on Page 1/3 is Attach Voice:
Using this feature in PLAY mode, you can attach voice
(audio) to an image after you have already captured and
stored the image. Press enter to display the Attach Voice
sub screen:
Press the enter key to begin recording voice that will be
“attached” to the image currently displayed or press the
“+” or “-” keys to scroll through your images to find the
image to which you wish to add an audio attachment.
To begin recording press and hold the enter key. The word “Recording” will appear
on the image display. When you are finished recording, release the enter key. The
maximum recording time is 10 seconds.
The image to which you have just attached voice will now bear a sound icon:
Note
: To retrieve your sound clips you must either connect the camera to your PC via USB, use a card
reader to read the CF card directly. Using a serial data Twain connection, there is no mechanism for
audio file transfer.
4.3.4 Mark
The fourth menu item on Page 1/3 is Mark:
There are two reasons to Mark an image.
1.
For protection against erasure
2.
To designate it for inclusion (or exclusion) from a
slide show.
Press either the “+” or “-” keys to select Erase Protect or
Slide show. Press enter key to go to the subscreen:
Press the enter key to mark the image currently displayed or
press the “+” or “-” keys to scroll through your images to
find those you wish to mark. Press DISP to completely exit
from the Mark functions.
Images that are Erase Protected will bear this icon:
Images that are marked for slide shows will bear the icon: