16
2.5 The Information LCD Icons
2.5.1 Information Liquid Crystal Display (LCD)
The small monochrome information LCD provides basic information about the status
and settings of your camera. This information LCD window comes on whenever the
camera is powered.
Note
: If the information display goes blank while the camera is in either PLAY or CAM modes, the
camera has automatically gone into a power saving “sleep” mode. To wake up the camera, press the
shutter button.
2.5.2 Image Number
The three large digits in the upper right-hand corner of the LCD indicate the image
number.
•
In CAM mode, this indicates how many more images you can take,
based upon your available CF card memory, resolution, and quality
settings. If no CF card is present, or if it is not fully seated, the Image
display will briefly flash
NoCard
, and the monochrome display Image
Number will show three dashes, “---”.
Note
: The number of images remaining is an estimate. It is a calculation based upon available
memory and the anticipated, or average, file size of an image taken in the resolution and quality
settings that are currently active. File sizes do vary however, depending upon the scene that you have
imaged. Complex images (where the image is very “busy”) take more space than average whereas
images of scenes which are of less contrast may be smaller than average.
•
In PLAY mode, it indicates the number of the images currently on the CF card.
If no CF card is present, or if it is not fully seated, the Image display will
display
NoCard
, and the monochrome display Image Number will show
three zeros, “000”
.
Note
: If the CF memory card is full, the image LCD will display “CARD FULL”.
Image Quality
Image Counter
Battery Status
Resolution
Macro
Flash Mode
Quality
Redeye
Flash Mode
Self Timer