background image

Page 1 of 26

1    General Safety & Care Information

General Safety & Care Information

1.1 

Who Can Use This Equipment

•   This equipment must only be used by people suitably trained in the use of pipe and cable 

locators.

1.2 

Work-site Safety

•    Use your companies, or other applicable safety code and rules when using this equipment.
•   Unless having the required authorization, license and appropriate training – do NOT make 

connections to any pipe, cable or conductor.

•    The equipment should not come in contact with corrosive or hazardous chemicals, or gases, 

dust.

•    Do NOT directly connect this equipment to cables or pipes that have a potential difference to 

ground of greater than 25V AC.

1.3 

Equipment Safety

•    Do NOT open the enclosures (housings) of either the transmitter or receiver.
•    Place the ground stake firmly in the ground before connecting the cable from the transmitter.
•    Do NOT hold any uninsulated portion of the connection leads & clips when the transmitter is 

switched on.

1.4 

Batteries and Environmental Safety

Vivax-Metrotech products use four types of batteries:

•     

Alkaline batteries

1.4.1 

Alkaline Batteries (Non Rechargeable)

•    When replacing the alkaline batteries – use only the size and type specified – do NOT mix 

battery types (rechargeable and alkaline).

•    Do NOT mix partially discharged and fully charged cells in the same battery pack – do NOT 

mix old with new.

•    

Never attempt to charge alkaline batteries.

1.4.2 

General Rules Regarding Disposal of Batteries

•    

NEVER disassemble a battery, or battery pack.

•     Never dispose of in a fire or water.
•    

Dispose of batteries in accordance with your Company’s work practice/environmental 

standards, the prevailing laws, or recognized best practice. Always dispose of batteries 

responsibly.

[email protected] | 13309 Beach Ave. Marina del Rey, CA 90292 

wctproducts.com | Phone:  800-WCT-PROD (928-7763) | Fax: 310-306-9343

Содержание VM-480B

































Отзывы: