Page 7 of 26
3 Introduction
3.2
Controls and Indicators of the Model VM-480B Transmitter
VM-480B Transmitter: Controls and Indicators
1
2
3
4
1
2
3
4
POWER INDICATOR LAMP
Indicates power is on. Blinks steadily if battery power is good, will slow down according
to power left in batteries. When it stops blinking, replace the batteries.
COND/AUX OUTPUT JACK
Insert either the direct connect cable or the 4820 Metroclamp cable into this jack. The
transmitter’s internal antenna is automatically disconnected when a plug is inserted into
this jack.
BATTERY ACCESS
PUSH/PULL POWER SWITCH
Pull this switch to turn the transmitter on. Power Indicator lamp will blink.
[email protected] | 13309 Beach Ave. Marina del Rey, CA 90292
wctproducts.com | Phone: 800-WCT-PROD (928-7763) | Fax: 310-306-9343