background image

Page 26 of 26

The indication that the receiver gives which is caused by the signals it 

is receiving. This can be visual, audio or both. Typically it is displayed 

on the locators dot matrix display and audibly from a loudspeaker in 

the receiver housing.

This describes the act of looking for a buried line within a given area.

A small transmitting coil which may be built into a product such as a 

sewer camera or packaged as a small self contained battery powered 

transmitter. A receiver tuned to the same frequency can locate the 

position of the Sonde and hence whatever it is attached to or in. 

Frequently used for locating sewer cameras, and the non metallic 

pipes.

The buried pipe or cable to be located.

Using a locator to following the path of a buried line.

Response

Search (sweep)

Sonde

Target Line

Trace

Illustrations used in the preparation of this manual will inevitably show some resemblance to 

similar illustrations from other Manufacturers-some manufacturers have given permission for the 

use of their graphics (Vivax-Metrotech & Seba) is given credit for these uses. This statement is 

intended to attribute such credit.

 

Disclaimer:

 Product and accessory specification and availability information is subject to change 

without prior notice.

8    Glossary

[email protected] | 13309 Beach Ave. Marina del Rey, CA 90292 

wctproducts.com | Phone:  800-WCT-PROD (928-7763) | Fax: 310-306-9343

Содержание VM-480B

































Отзывы: