Vivax Metrotech vLocML2, Руководство пользователя

Страница: 66 / 78

9 Using the vLocPro2
•
Re-trace your line back to a point where a solid signal direction is obtained. Precisely pinpoint the line
and stand with your back to the direction of the transmitter as you did when you initiated the original
sync and press the “i” pushbutton then the enter pushbutton to re
•
Continue to locate, pinpoint and trace.
NOTE
If several
the other lines. This is useful for locating multiple line installations.
However be aware
line that line will also appear as b
When performing a reset, take care to ensure that you have not strayed from
the target line.
9.4 Using the Accessories
9.4.1 Using the LPC
The LPC separation filter (LPC) is used to safely inject a trace to
socket, so that the cable can be traced from the premises to the connection in the street. It is suitable for
connecting to voltages between 100V AC and 250V AC.
Method:
Plug the LPC into the output socket of the tr
the socket, switch off. Plug in the LPC to the mains socket
switch to match the two indicator lights.
are good frequencies for this application). Set the output to mid range.
trace your line back to a point where a solid signal direction is obtained. Precisely pinpoint the line
with your back to the direction of the transmitter as you did when you initiated the original
sync and press the “i” pushbutton then the enter pushbutton to re-sync with the transmitter signal.
Continue to locate, pinpoint and trace.
NOTE
If several lines are commonly bonded the Signal Direction will carry through to
the other lines. This is useful for locating multiple line installations.
However be aware that if a non target line is commonly bonded to the target
line that line will also appear as being “in Sync” with the target line.
When performing a reset, take care to ensure that you have not strayed from
the target line.
Accessories
LPC Separation Filter
(LPC) is used to safely inject a trace tone to a live cable via a domestic mains
socket, so that the cable can be traced from the premises to the connection in the street. It is suitable for
connecting to voltages between 100V AC and 250V AC.
Plug the LPC into the output socket of the transmitter. Identify a suitable main socket. If a switch is fitted to
the socket, switch off. Plug in the LPC to the mains socket and then switch back on
switch to match the two indicator lights. Set the transmitter to the frequency to be located.(8 kHz or 32 kHz
are good frequencies for this application). Set the output to mid range.
Page 60 of 72
trace your line back to a point where a solid signal direction is obtained. Precisely pinpoint the line
with your back to the direction of the transmitter as you did when you initiated the original
sync with the transmitter signal.
lines are commonly bonded the Signal Direction will carry through to
the other lines. This is useful for locating multiple line installations.
that if a non target line is commonly bonded to the target
eing “in Sync” with the target line.
When performing a reset, take care to ensure that you have not strayed from
ne to a live cable via a domestic mains
socket, so that the cable can be traced from the premises to the connection in the street. It is suitable for
ansmitter. Identify a suitable main socket. If a switch is fitted to
and then switch back on. Set the LPC rotary
e located.(8 kHz or 32 kHz