Vivax Metrotech vLocML2, Руководство пользователя

Страница: 26 / 78

5 Data Logging
5. Data Logging
The vLoc2 has an internal memory that can be used to store location data. It can store in excess of 1000
records.
To store a record first locate a point of interest. Hold the vLoc statio
pushbutton. When in the depth and current
number indicates the number of records stored.
If the GPS function is enabled the GPS coordinates will also be
more information on Data logging and GPS see section
5.1 Bluetooth
As an optional extra the vLocPro2
accessory. The Bluetooth option
5.1.1 Fitting the Bluetooth
1. Ensure the unit is switched off.
2. Use a small cross head screw driver to remove the two screws r
found at the back of the
3. Remove the cover by sliding it away from the handle.
4. Take the Bluetooth module and carefully slide it into the position the cover was occupying.
5. Replace the two cross head screws.
6. Switch on the unit and after a few se
is fitted.
7. If a red line is shown through the icon, this indicates that the
enable is located in the user menu which is accessed using a long pre
8. The Bluetooth can communicate with external devices that are also
Bluetooth enabled GPS devices but Vivax
requiring mapping to accuracie
instance submeter accuracy, the customer should contact a GPS supplier of their choice. However, as a
recommendation, one such device that delivers submeter accuracy is the Trimble ProX
Data Logging
Loc2 has an internal memory that can be used to store location data. It can store in excess of 1000
To store a record first locate a point of interest. Hold the vLoc stationary over the target and press the
depth and current screen, press the “+” pushbutton to save the data.
number indicates the number of records stored.
If the GPS function is enabled the GPS coordinates will also be displayed and attached to any saved file. For
more information on Data logging and GPS see section 5.2.5.4.
vLocPro2 and vLocML2 receivers can be fitted with a Bluetooth
option can be retrofitted and can be ordered at a later date if preferred.
Bluetooth Module
Ensure the unit is switched off.
Use a small cross head screw driver to remove the two screws retaining the Bluetooth
found at the back of the handle near the battery compartment.
Remove the cover by sliding it away from the handle.
module and carefully slide it into the position the cover was occupying.
Replace the two cross head screws.
Switch on the unit and after a few seconds a grey, Bluetooth icon should appear showing that the module
If a red line is shown through the icon, this indicates that the Bluetooth module is not enabled.
enable is located in the user menu which is accessed using a long press of the “i” button.
can communicate with external devices that are also Bluetooth enabled. There are many
enabled GPS devices but Vivax-Metrotech offer the Holux GPS as a suitable solution for those
requiring mapping to accuracies better than 5m. For those requiring accuracies better than this, for
instance submeter accuracy, the customer should contact a GPS supplier of their choice. However, as a
recommendation, one such device that delivers submeter accuracy is the Trimble ProX
Page 20 of 72
Loc2 has an internal memory that can be used to store location data. It can store in excess of 1000
nary over the target and press the “i”
button to save the data. The “Log”
displayed and attached to any saved file. For
Bluetooth communications
can be retrofitted and can be ordered at a later date if preferred.
Bluetooth cover. This is
module and carefully slide it into the position the cover was occupying.
icon should appear showing that the module
module is not enabled. Bluetooth
” button.
enabled. There are many
Metrotech offer the Holux GPS as a suitable solution for those
s better than 5m. For those requiring accuracies better than this, for
instance submeter accuracy, the customer should contact a GPS supplier of their choice. However, as a
recommendation, one such device that delivers submeter accuracy is the Trimble ProXT.