Vivax Metrotech vLocML2 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 78

Vivax Metrotech vLocML2 Скачать руководство пользователя страница 57

9 Using the vLocPro2

Page 51 of 72

To pinpoint the Sonde, find the peak in both directions.

When over the peak position, the depth is automatically displayed. Press the “i” pushbutton to get a more
precise depth reading.

TIP

Using the compass to locate the Sonde requires free space to walk to the side of the Sonde. If there is an
obstacle such as a wall or vehicle that restricts walking in an arc, the following method can be used.

•

Position the locator in the approximate vicinity of the Sonde as above.

•

Rotate the locator so that the compass is now pointing at 3 o’clock.

•

Now step to the side keeping the locator pointing in the same direction. The compass will rotate
slightly.

•

Keeps the locator pointing in the same direction and walk forward. The compass will slowly rotate.
When it reaches 12 o’clock follow the compass keeping it at 12 o’clock.

Pinpoint the Sonde as in the first procedure.

«
...
55
56
57
58
59
...
»

Содержание vLocML2















































































Отзывы:

Нет отзывов