5 First steps
18
6. Set alarm indicator
-
Alarm
and
on
or
off
light up in the display.
> Switch alarm indicator on or off:
[ ]
or
[ ]
and confirm with
[Hold]
.
7. Set the temperature unit.
-
°C
or
°F
lights up in the display.
> Set the temperature unit
(°C/°F
):
[ ]
or
[ ]
and confirm
with
[Hold]
.
8. Enable / disable PIN.
-
PIN
and
yes
or
no
light up in the display.
> Activate
PIN
(
yes
) or deactivate it (
no
is the standard
setting).
9. Carry out reset.
-
rst
and
yes
or
no
light up.
> Activate or deactivate
rst
:
[ ]
or
[ ]
.
- Selection of
yes
: Delete adjustment value, is reset to the
factory setting.)
- Selection of
no
: no reset, adjustment value is retained).
Quitting configuration mode early and saving
You can quit the configuration mode early.
The configuration mode cannot be stopped in the
adjustment / calibration process.
> Quit configuration mode early: Press and hold
[
]
for approx.
1 sec.
- Configuration mode is stopped.
- The values which have so far been set and confirmed with
[Hold]
are applied.
- The instrument switches to the measuring mode.
5.2.4.
Locking / unlocking configurations
You can lock/unlock the set values, including TPM limit values,
from the configuration mode. The instrument is delivered with the
configuration mode unlocked (PIN is deactivated,
no
).
Requirements: Instrument is in configuration mode.
> Go through the configuration mode with
[Hold]
, until
PIN
and
yes
or
no
light up in the display.
Lock configuration mode
> Activate
PIN
: Select
yes
with
[ ]
or
[ ]
.
-
PIN
is activated and the configuration mode is locked.
Содержание OILTESTER
Страница 1: ...OILTESTER Deep frying Oil Tester Instruction manual...
Страница 2: ...2...
