5 First steps
15
Setting the upper TPM limit value
Requirement: Instrument is in configuration mode,
lower TPM limit value has been set and confirmed with
[Hold]
.
1.
Alarm
and the set upper limit value appear on the display.
- When alarm indicator is activated: the display lights up red.
2. Set the upper limit value with
[ ]
or
[ ]
.
3. Confirm with
[Hold]
.
- New upper limit value is applied.
> Carry out further settings in the configuration menu or quit the
configuration menu with
[
]
.
5.2.2.3.
Hold function
Measured values can be held manually.
Requirement: Sensor is in the oil.
1. Briefly press
[Hold]
(< 1 sec).
-
Hold
appears in the display.
- Readings are held.
2. To switch to the measuring mode: Briefly press
[Hold]
(<
1 sec).
- Hold function is deactivated.
- Current readings are displayed.
5.2.2.4.
Auto-Hold function
When the
Auto-Hold
function is activated, the measured values
are automatically held by the instrument after the equalization
period.
To activate/deactivate the
Auto-Hold
function, see
Carrying out the
configuration, page
17
5.2.2.5.
Auto-off function
When the
Auto-off
function is activated, the instrument
automatically switches off after a certain time
• If the instrument is in measuring mode: automatic switch-off
after 2 mins.
• If the instrument is in hold or configuration mode: automatic
switch-off after 10 mins.
To activate/deactivate the
Auto-off
function, see
Configuring the
instrument, page
16
Содержание OILTESTER
Страница 1: ...OILTESTER Deep frying Oil Tester Instruction manual...
Страница 2: ...2...
