VITO OILTESTER, Инструкция по эксплуатации

Страница: 16 / 28

5 First steps
16
5.2.2.6. Battery capacity
With decreasing battery capacity, a symbol lights up in the display (
). If the empty battery symbol ( ) flashes in the display, the
remaining capacity is only approx. 30 min.
If the battery voltage is too low, the instrument automatically
switches off.
> Change batteries, see
Changing batteries, page 24
5.2.3. Configuring the instrument
Setting options in the configuration mode
Configurations Setting options
Setting the TPM limit values
Alarm , Alarm
Lower TPM limit value Alarm
Upper TPM limit value Alarm
Carry out calibration
CAL
no : Do not carry out calibration.
yes : Carry out calibration.
Automatically hold readings
Auto-Hold
on : Readings are automatically
held by the instrument.
off : Readings are not
automatically held.
Automatically switch off the
instrument
Auto-off
on : Instrument switches off
automatically after 2 or 10 mins.
off : No automatic switch-off.
Set alarm indicator
Alarm
on : Alarm indicator activated
off : Alarm indicator deactivated
Set temperature unit
°C, °F
°C or °F
Lock configuration, including
TPM limit values
PIN
no : Do not lock configuration.
yes : Lock configuration
Carry out reset
rst
no : Do not reset the adjustment
value to the factory setting.
yes : Reset the adjustment value
to the factory settings.
Firmware version Firmware versions of the product
components are shown.