Vito Agro VIMB12TA, Инструкция по эксплуатации

Страница: 37 / 50

EN
37
Low output flow rate:
� Suction hose has collapsed, is damaged or has a very
small diameter;
� Air inlet on hose connector to inlet connector;
� Filter drain / clogged;
� Discharge hose or has a very small diameter.
� The suction height (height between the filter / pin and
the pump) is very close to the maximum height defined
in the operating characteristics of the motor pump;
� The throttle lever is set at low speed;
� Replace the suction hose;
� Fit the rubber gasket and tighten well, replace if
damaged;
� Clean the filter / drain;
� Replace discharge hose;
� Fit the pump in order to reduce the suction height;
� Pull the throttle lever to the right;
17
We declare under our exclusive responsibility, that the
product Meets the following standards or standardisation
documents: EN 809:1998+A1:2009+AC:2010, EN ISO
14982:2009 according to the determinations of the
directives:
2014/30/EU - Electromagnetic compatibility directive;
2006/42/EC - Low voltage EC directive;
2000/14/CE - Sound power level mesured:LpA: 76.2
dB(A).
- Sound power level guaranteed: LwA: 89.7 dB(A);
S. João de Ver, 10 August 2017
Central Lobão S. A.
Responsible for the Technical File
The warranty of this product is two years from the date
of purchase. You should, therefore, keep your proof of
purchase during this period of time. The warranty covers
any manufacturing defect in material or operating, as well
as parts and work needed for their recovery.
Excluded from the warranty the misuse of the product, any
repairs carried out by unauthorized persons (outside the
service center of the brand VITO) as well as any damage
caused by the use of it.
WARRANTY DECLARATION OF CONFORMITY