ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN
32
10.7.
Updating Firmware
Once IP devices are searched and shown on the screen as functioning successfully, you can update
the firmware of them in IP Installer program. To do that, first check the firmware version of the
device, which you can find on the IP Installer window.
In the above picture, the firmware version of this product is 4.14-01-ds while the latest
firmware version available is 4.16-B0-ds-VI as you could see at Vitek’s homepage
(
http://www.vitekcctv.com/Downloads.asp
). If you decide to update the firmware, first
create a folder on your computer for the update firmware, than download the latest firmware to
that folder.
Then select the IP device to be updated on IP Installer window, then click Update Firmware
button from the toolbar. The following window will be displayed.
You may find the Password field is empty on the window shown above. If so, click the Password
field of the IP device and enter the proper password for the device. You are not allowed to update
the firmware if the correct password is not provided.
After the password is entered, the Start Update button will be enabled now. Click the button to
see the following window for selecting the folder where the file has been saved.
Highlight the folder
than clickOK.
Содержание VTD-13FN
Страница 23: ...ENVI Series VTD 13FN VTD 13VN VTD 20VN 22 Click on the Finish button to close the window...
Страница 123: ...ENVI Series VTD 13FN VTD 13VN VTD 20VN 122 Group Circulation Start sequencing between groups...
Страница 126: ...ENVI Series VTD 13FN VTD 13VN VTD 20VN 125 Enhanced Draw Mode On Off Enhance image for a better reproduction...
Страница 139: ...ENVI Series VTD 13FN VTD 13VN VTD 20VN 138...