Vitek VTD-13FN Скачать руководство пользователя страница 56

Страница: 56 / 174

ENVI Series: VTD-13FN / VTD-13VN / VTD-20VN

You can configure the video data format and other information to be contained in it.

•

Video with Flexible Extra System data: If Enabled, video data will contain UART sensor

data from COM port..

(

Feature not available on this model)

•

Video with user defined message: If Enabled, video data will contain the user-defined

data. (Reserved Field).

(

Feature not available on this model)

•

Video with PPP status: If Enabled, video data will contain PPP connection status..

(

Feature not

available on this model)

•

Video with camera name: If Enabled, video data will contain the camera name..

(

Feature not

available on this model)

•

Video with server name: If Enabled, video data will contain the server name that you

defined..

(

Feature not available on this model)

•

Video with IP address: If Enabled, video data will contain the IP address of the video

server..

(

Feature not available on this model)

•

Audio: (not available on all models) Select if Audio function is to be used (applies to Primary

Stream only). VITEK Cameras provides 2-way audio streaming by combining microphone input

with video data. Users can listen to the streamed audio through a PC and speakers.

•

Frame Rate: For Primary Stream, this is the number of frames compressed in every second.

You can control the network traffic with this parameter. For Secondary Stream, it can be set to a

manner of 1/2, 1/4, 1/8... of the primary stream.

•

Image Size: Select the resolution of each channel’s video

•

Encoding Standard: Select the compression method of each video, either M-JPEG or H.264

format. It is not allowed to set both channels to M-JPEG.

Below is the table of images sizes. To save the setting, click Apply button

Содержание VTD-13FN















































































































































































Результаты поиска

Содержание VTD-13FN

Отзывы:

Vitek VTD-13FN, Руководство пользователя, Страница: 56 / 174

Результаты поиска

Содержание VTD-13FN

Отзывы: