HD-SDI CAMERA
55
10.7.4 Dome Angle
Flip ON
: The PTZ dome camera moves up to 180° vertically.
OFF
: The PTZ dome camera only moves up to 90° vertically.
The flip feature is useful when you need to track someone who walks directly
beneath the dome and continues on the other side.
Tilt Limit
Limitation of tilt range
Helpful if ceiling is visible at wide angle settings -5° to +10°
Pan Limit
If the PTZ dome camera is installed near a wall, the panning range can be limited.
1.
Position the PTZ dome camera under 90° vertically.
2.
Select Left Pan Limit.
3.
Adjust the left pan limit (see section 10.1.2.2 Edit Position).
4.
Press the
IRIS-OPEN
button on the key board controller
5.
Select Right Pan Limit.
6.
Adjust the right pan limit (see section 10.1.2.2 Edit Position).
7.
Press the
IRIS-OPEN
button on the key board controller
8.
Set Enable Pan Limit to ON.
9.
Set Apply Auto Pan to ON to apply the pan limits to the auto pan (endless
panning).
Set the pan limit first before setting presets, scans and patterns.
COMMUNICATOIN MODE
Communication Type :RS-485
Response.
:ON
Save and Exit
VIEW ANGLE SETUP
Flip
:ON
Tilt Limit
:-05
Left Pan Limit :000.0
Right Pan Limit :000.0
Enable Pan Limit :OFF
Apply Auto Pan :ON
Save and Exit
Содержание VT-PTZ220HD
