HD-SDI CAMERA
17
If the distance between the camera and the monitor exceeds the recommended
maximum, please use an auxiliary HD-SDI Repeater.
Figure 10 – HD-SDI Video Cable
8.7.5 Connecting Alarms
Alarm In (AL1 to 8)
Magnetic, PIR or other external sensor devices can be used to signal the dome
camera to react to an event.
If you want to use alarm input, the types of sensor must be selected in OSD
menu. The sensor types are ‘Normal Open’ and ‘Normal Close’.
Select Alarm input in OSD menu
Normal Open Sensor devices: Select
NO
Normal Close Sensor devices: Select
NC
Alarm In activation:
N.O. ---Short circuit between GND and Alarm Input pin
N.C. ---Open circuit between GND and Alarm Input pin
Alarm Out 1,2
If you want to use alarm Output, the Number of output
“1”
and
“2”
must be
selected in OSD menu.
1. Alarm out
“1”
in OSD menu
2. Alarm out
“2”
in OSD menu
Содержание VT-PTZ220HD
