Vitek VT-PTZ220HD, Руководство пользователя

Страница: 31 / 69

HD-SDI CAMERA
29
main DOME MENU.
10.1.4 Scan
The scan function enables the PTZ dome camera to move automatically
between two user-defined positions at different speeds. This is very helpful if
monitoring certain areas frequently.
Scans can be called directly, assigned to actions or applied as “home” position.
Number 01–16
Title Up to 16 characters
Mode Normal: Move from start point to end point in panning only
Diagonal: Move from start point to end point including tilt and zoom
simultaneously and linearly
Speed 1– 8 Level (1: slower, 8: faster)
Dir
Scan direction: CCW (Counter Clock Wise) CW(Clock Wise)
Start Set Start point
End Set End point
Swap Swaps the start point for the end point if
Enabled (ON)
Dwell Dwell time at the start and end point, 03– 99
seconds
1. Select a number for the scan.
2. Edit the title of the scan (see section 10.1.2.1 Edit Title).
3. Select the scan mode.
4. Select the scan speed.
5. Edit the position of the start and end point (see section 10.1.2.2 Edit
Position”).
6. Set the scan direction.
SCAN SETUP
Number :01
Title :SCAN1
Mode :Normal
Speed :3 LEVEL
Start :None
End :None
Dir :ccw
Swap :OFF
Dwell :03 Sec
Save and Exit