Vitek VT-8545, Инструкция по эксплуатации

Страница: 3 / 36

3
ENGLISH
BLENDER SET VT-8545
The blender is included into the blender set
and intended for whisking, mixing, chopping
and combined processing of liquid and solid
products.
DESCRIPTION
1. Detachable blender attachment
2. Attachment installation place
3. Motor unit
4. On button «ON»
4а. Switching on lock button « »
5. Rotation speed control knob
6. Chopper geared lid
7. Knife
8. Chopper bowl
9. Whisk attachment gear
10. Whisk attachment
11. Cup
SAFETY PRECAUTIONS
Before using the blender set, read this instruc-
tion carefully. Keep these instructions for fur-
ther reference. Use the blender set for its
intended purpose only as specified in this
manual.
Mishandling the unit may lead to its breakage
and cause harm to the user or damage to his/
her property.
•
Before connecting the unit to the mains,
make sure that the voltage specified on
the unit corresponds to your home mains
voltage.
•
Do not use the unit outdoors.
•
Do not use the unit near hot surfaces (such
as gas or electric stove, oven).
•
Make sure that the power cord does not
touch sharp edges of furniture and hot sur-
faces.
•
Do not touch the motor unit body, the power
cord and the power plug with wet hands.
• To avoid risk of electric shock or fire, do
not immerse the unit body, the power cord
and the power plug into water or any other
liquids.
•
If the unit is dropped into water:
– do not touch the water;
–
unplug the unit immediately and only
after that you may take the unit out of
water;
–
apply to the authorized service center for
testing or repairing the unit.
•
Before using the unit for the first time, thor-
oughly wash all the removable attachments
and containers that will contact food.
•
Use only the attachments supplied with
the unit.
• Before using the unit, make sure that the
attachments are set and fixed properly.
•
It is not allowed to switch the unit on without
attachments and foodstuffs for processing.
•
Never leave the unit connected to the mains
unattended.
•
Always unplug the unit before changing the
attachments and after using it.
•
Place the chopper bowl on a dry, flat and
steady surface.
•
Put the products into the chopper bowl
before the unit is switched on.
•
Cool down hot products before putting
them into the measuring cup or the chop-
per bowl.
•
Do not overfill the chopper bowl with prod-
ucts and watch the level of poured liquids.
• If rotation of the knife is hindered during the
operation of the chopper, unplug the unit
and carefully remove foodstuffs that pre-
vent the knife rotation.
•
Remove products and pour out liquids from
the chopper bowl only after complete stop
of the knife.
•
The cutting edges of the chopping knife
and of the blender attachment are very
sharp and can be dangerous. Handle these
attachments very carefully!
•
Do not touch the rotating parts of the unit.
Do not let hair or free hanging clothes get
into the rotation area of the blender attach-
ment knife or whisk.
•
To unplug the unit do not pull the power
cord, take the power cord plug directly and
disconnect it from the mains.
• Do not place the chopper bowl and the
measuring cup into a microwave oven.
•
Do not put the attachments and bowls in a
dishwashing machine.
• For children safety reasons do not leave
polyethylene bags used as a packaging
unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger
of suffocation!
IM VT-8545.indd 3 5/25/20 3:52 PM