Cabling Systems & Solutions
UTP = Unshielded Twisted Pair / STP = Shielded Twisted Pair
Rev102007 VGE01
VGA Extender
Model: VB100VK
The VGA Extender allows VGA video signals to be transmitted up to 500ft / 135m via 4-pairs CAT5
STP or UTP cable. Used in pairs, the VGA Extender can be used in home or commercial applications
as a smart, fast and cost-effective solution. It eliminates costly and bulky VGA cable, allowing VGA
monitors to be connected extended distances from the PC via standard twisted pair cable. This
product is ideal for classrooms, lecture halls, retail kiosks, video information displays, overhead
projector systems, PC-training systems, and tradeshows PC demo systems.
Features:
z
Passive device, no power required
z
Includes VB100VK-T Transmitter unit and VB100VK-R Receiver unit
z
Supports up to 1280x1024 pixels
z
Distance up to 500ft / 135m via standard CAT5 STP or UTP cable instead of VGA cable
z
Transmitter has built-in virtual DDC to avoid improper resolution and frequency settings
z
Transmitter has built-in sync mode selection for signal stability
z
Receiver has built-in sync filter level adjustment for signal stability
Installation:
Recommended Cable:
1. CAT5e UTP/STP or CAT6 UTP cable.
2. Certain brands or models of monitors are highly sync-sensitive. In these cases we recommend
using STP (shielded twisted pair) cable instead of UTP (unshielded twisted pair) cable.
RJ45 Pin Configuration: TIA/EIA 568B Wiring standard
1. Orange-white
Red +
2.
Orange Red
-
3. Green-white
H-Sync
4.
Blue
Green
+
5.
Blue-white
Green
-
6.
Green
V-Sync
7. Brown-white
Blue +
8.
Brown
Blue
-
