Cabling Systems & Solutions
UTP = Unshielded Twisted Pair / STP = Shielded Twisted Pair
Rev102007 VGE01
Switch Setting:
VB100VK-T Sync Mode Select
←
Mode
1
→
Mode 2
1. For newer monitors, Mode 1 is recommended for the best stability. If you experience
problems with the picture, switch to Mode 2.
2. For older monitors, Mode 2 is recommended. If the picture is still not stable, please try
adjusting the dip switches on the VB100VK-R Receiver unit. In the case that the dip
switches still do not fix the problem, please use STP (shielded twisted pair) cable.
DIP Switch Setting:
VB100VK-R Sync Filter Level
====================
１２３４５
↓↓↓↓↓
Level
0
(Min)
↑
↓↓↓↓
Level
1
↓
↑
↓↓↓
Level
2
↓↓
↑
↓↓
Level
3
↓↓↓
↑
↓
Level
4
↓↓↓↓
↑
Level 5 (Max)
The Sync Filter is designed for UTP CAT5 cabling. Sync Filter level adjustment adds sync
stability, but does not adjust picture quality or eliminate skew.
Since each monitor has different settings, there is no recommended setting. Please
adjust the level based on picture stability. If there is no picture display or if you experience
problems with the picture, please use STP cable.
Caution:
1. The wiring must be placed away from electromagnetic equipment, i.e. microwave, wireless,
high voltage cable…etc.
2. The maximum distances supported by the VGA Extender are dependent on the type of twisted
pair cable used and image resolution of the PC’s VGA interface. Make sure that the maximum
recommended operational distances have not been exceeded.
3. All wiring is “straight-through” twisted pair cable, and should not be used for other LAN or
telephone equipment.
4. Do not connect the VGA Extender to a telecommunication outlet wired to unrelated equipment.
