6
ENGLISH
Possible troubles and troubleshooting:
Malfunction
Cause
Solution
The garment steamer
is not switched on.
The power plug is not inserted into the
socket.
No voltage in the socket.
Insert the power plug into the mains
socket.
Insert a known good appliance into
the socket; if the socket malfunctions,
contact the appropriate service.
No steam release.
The steamer didn’t heat up to the
required temperature.
You do not press the steam supply
button completely.
Not enough water in the water tank.
The water tank is not installed properly.
Wait until the steamer heats up and the
light indicator goes out.
Press the steam supply button as far as
it wil go.
Fill the water tank with water.
Make sure that the water tank is
installed properly.
Water leaks from
the steam release
openings.
During the operation the pressure
in the steam chamber increases, so
water drops may appear in the steam
release openings.
It is normal.
The sound of boiling
water inside the
steamer and a slight
vibration of the unit
body during the
operation.
Boiling of water in the steam chamber
is accompanied by a distinctive sound,
when the steam supply is switched on,
the pump switches on, its operation is
accompanied by a distinctive sound
and a slight vibration.
It is normal.
DELIVERY SET
Garment steamer – 1 pc.
Brush attachment – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
Rated input power: 1000-1200 W
Water tank capacity: 100 ml
Steam release: 20 g/min
ATTENTION! Do not use the unit near water in the
bathrooms, showers, swimming pools etc.
RECYCLING
For environment protection do not throw out the unit
and the batteries (if included), do not discard the
unit and the batteries with usual household waste
after the service life expiration; apply to specialized
centers for further recycling.
The waste generated during the disposal of the unit
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this prod-
uct apply to a local municipal administration, a dis-
posal service or to the shop where you purchased
this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@ vitek.ru for
receipt of an updated manual.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage Directive
2014/35/EU.
IM VT-2439.indd 6
8/25/20 2:16 PM
